PontiacParadise.com Shop Products

Full Size Trunk Mounts (1961-1968) (1 Side)

Thu, 09 Sep 2010 11:04:05 -0400

*One Side Only*

We are currently taking pre-orders and expect to ship in mid-November 2009.

What is the first thing to go under your full size Pontiac? Yes, the trunk mounts. They fill up with sand, dirt, mud, leaves, snow, ice, salt…whatever and they hold it. And when you go to replace your trunk pan, you find these are a lost cause and usually they get cut off with a torch, as the bolts are frozen. Well, no more. PontiacParadise.com IS the source for these. They are US MADE and use 14 gauge steel. They have the same appearance as the original mounts. The can be either bolted or welded (suggested) on to either side as they are totally interchangeable.

Overseas shipping available at cost. Please call.

Full Size Trunk Mounts (1961-1968) (Both Sides)

Thu, 09 Sep 2010 11:04:05 -0400

We are currently taking pre-orders and expect to ship in mid-November 2009.

What is the first thing to go under your full size Pontiac?

Yes, the trunk mounts.

They fill up with sand, dirt, mud, leaves, snow, ice, salt…whatever and they hold it. And when you go to replace your trunk pan, you find these are a lost cause and usually they get cut off with a torch, as the bolts are frozen. Well, no more. PontiacParadise.com IS the source for these.

They are US MADE and use 14 gauge steel. They have the same appearance as the original mounts. The can be either bolted or welded (suggested) on to either side as they are totally interchangeable.

Instructions included.

The product photo shows our prototype. We had to drill out the spotwelds. The production version will not have holes on the edges.

Has the “floating nut” in place as original.

Overseas shipping available at cost. Please call.

Reproduction 1961 to 1964 Pontiac Full Size Fuel Tanks (Entire Package with Double Line)

Thu, 09 Sep 2010 11:04:05 -0400

1961 thru 1964 Pontiac Full Size Gas Tank, 25 gal. NEW RELEASE For Bonneville, Catalina, 2+2, Ventura, Star Chief & Grand Prix, (EXCEPT station wagon). Original GM part #9776546, Hollander #112. This is a Steel tank and made per original design. The tank has a special coating as to prevent rust. Tank has a 3 year manufacturer warranty. NOTE: Must transfer old filler neck to new tank. We DO have new sending units, neck “O” rings and strap sets available.

This is a high quality replacement tank!

Reproduction 1961 to 1964 Pontiac Full Size Fuel Tanks (Entire Package)

Thu, 09 Sep 2010 11:04:05 -0400

This is a high quality replacement tank!

Filler Neck “O” Ring

Thu, 09 Sep 2010 11:04:05 -0400

For use with 61 - 64 Fuel Tanks, Original GM Part #9776546, Hollander #112

Sending Unit (double line for factory air cars)

Thu, 09 Sep 2010 11:04:05 -0400

For use with 61 - 64 Fuel Tanks, Original GM Part #9776546, Hollander #112

Sending Unit (Single Line)

Thu, 09 Sep 2010 11:04:05 -0400

For use with 61 - 64 Fuel Tanks, Original GM Part #9776546, Hollander #112

Strap Set

Thu, 09 Sep 2010 11:04:05 -0400

For use with 61 - 64 Fuel Tanks, Original GM Part #9776546, Hollander #112

Reproduction 1961 to 1964 Pontiac Full Size Fuel Tanks (Tank Only)

Thu, 09 Sep 2010 11:04:05 -0400

This is a high quality replacement tank!

Carburetor Rebuilding Service Available

Thu, 09 Sep 2010 11:04:05 -0400

Starting immediately, PontiacParaidse.com is offering custom & correct Carburetor Rebuilding Service to include correct dying and coloring of all carb components. This includes the following types of carbs:

Rochester 2 barrel carbs to include tri-power carbs
Carter AFB 4 barrel carbs 1961 to 1966
Quadrajet carbs 1967 to 1976

Turn-around time depends on the condition of your carb, but normal time is 2 to 3 weeks. A normal AFB rebuild runs around $200 to $225. Retired GM Carb Tech has a large amount of cores and parts to help in your rebuild. Please contact us to arrange. PontiacParadise.com has an inventory of certain “rebuilt” carbs in stock, mainly 3-2 setups and AFB’s, which may be available on an exchange basis. We also stock some cores.

Note: By adding this service to the shopping cart and completing the purchase, you will be billed $200.00, but may be charged additional fees depending on the condition of your carb after we receive it.

Stainless Steel & Aluminum Molding Buffing and Repair Service

Thu, 09 Sep 2010 11:04:05 -0400

Starting September 15, 2009, PontiacParadise.com will begin accepting classic car stainless and aluminum moldings for buffing, polishing and repair work as needed. All work will be done on-site and will be to your satisfaction. Buffing & polishing pricing will be based on a per foot basis and according to width. Repairs will be based on a man-hour basis billing at ¼ hour intervals.

Add this item to the shopping cart and go through the purchase process to notify us of your need for this service. You will be invoiced separately.

1961 - 1968 Pontiac Shifter Porches

Thu, 09 Sep 2010 11:04:05 -0400

This is a high quality exact fiberglass reproduction of the shifter porches used in 1961 to 1964 full size Pontiacs, 3 or 4 speed, with or without a console.

1961 – 1968 Pontiac Shifter Porches

Thu, 09 Sep 2010 11:04:05 -0400

This is a high quality exact fiberglass reproduction of the shifter porches used in 1961 to 1964 full size Pontiacs, 3 or 4 speed, with or without a console.

Reproduction GM Clutch Fork

Thu, 09 Sep 2010 11:04:05 -0400

Can Be Used (with modifications) for 61 to 64 Full Size Pontiacs.

Same basic length as 61 to 64 Pontiac Clutch Fork.
Uses same size throw out bearing as 61 to 64 Pontiac.

1961-1964 Bonneville Trunk Pan Set

Thu, 09 Sep 2010 11:04:05 -0400

Manufactured from 18 gauge US made steel, these are sold in three pieces for easy installation without removing your body from the frame. These are very close to the originals in design although the reliefs may not be quite as deep as the originals. Expect to do some cutting and trimming for a good fit, however all are somewhat oversized to allow for this.

1961-1964 Catalina Trunk Pan Set

Thu, 09 Sep 2010 11:04:05 -0400

1961 to 1968 Full Size Pontiac Sway Bar Bushings

Thu, 09 Sep 2010 11:04:05 -0400

Somewhat difficult part to find. 1961 to 1968 Full Size Pontiac Front Sway Bar Bushings. We've got them in stock NOW!

1961 to 1964 Full Size Pontiac Manual Transmission Rear Mount Rubber Cushions

Thu, 09 Sep 2010 11:04:05 -0400

Pontiacparadise.com, the leader in bringing you the hard-to-find full size pontiac parts now brings you the rear rubber cushions for your original T-10 or 3 speed manual transmission mount.

STABILIZER BUSHING, Front To Frame

Thu, 09 Sep 2010 11:04:05 -0400

Click to view image of part STABILIZER BUSHING, Front To Frame

Thu, 09 Sep 2010 11:04:05 -0400

STABILIZER LINK KIT, Front At Control Arm (per side)

Thu, 09 Sep 2010 11:04:05 -0400

STABILIZER LINK KIT, Front At Control Arm (per side)

Thu, 09 Sep 2010 11:04:05 -0400

CONTROL ARM SHAFT KIT, Front Upper

Thu, 09 Sep 2010 11:04:05 -0400

CONTROL ARM BUSHING, Front Upper, W/ EXTERNAL THREAD SHAFT

Thu, 09 Sep 2010 11:04:05 -0400

CONTROL ARM BUSHING, Front Upper, W/ EXTERNAL THREAD SHAFT

Thu, 09 Sep 2010 11:04:05 -0400

Stabilizer Bushing, Front To Frame

Thu, 09 Sep 2010 11:04:05 -0400

Stabilizer, Front To Frame

Thu, 09 Sep 2010 11:04:05 -0400

Stabilizer Link Kit, Front At Control Arm (per side)

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Shaft Kit, Front Upper

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Bushing, Front Lower

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Bushing, Rear Upper

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Bushing, Rear Lower

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Bushing, Front Upper, W/ External Thread Shaft

Thu, 09 Sep 2010 11:04:05 -0400

Ball Joint, Front Lower

Thu, 09 Sep 2010 11:04:05 -0400

Ball Joint, Front Right Upper

Thu, 09 Sep 2010 11:04:05 -0400

Ball Joint, Front Left Upper

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Bushing, Front Upper, W/ Internal Thread Shaft

Thu, 09 Sep 2010 11:04:05 -0400

Control Arm Shaft Kit, Front Upper

Thu, 09 Sep 2010 11:04:05 -0400

Shock Absorber, Rear, Heavy Duty